The FR80 Salmon can capture EAN codes moving at 3.5 meters per second. This is especially significant for the experienced user at a static point of sale (POS), for quickly processing baskets of goods and reducing check-out queuing.
The FR80 Salmon’s short & long-range illumination and anti-glare are designed for customer-facing applications, such as retail self-service and POS scanning. This prevents user being dazzled by sharp illumination and reflections. Additionally, the FR80 Salmon performs well when scanning off phone-screens.
Performance| Image Sensor | 1280x1080 CMOS |
| Illumination | Red LED (614nm-624nm) |
| Depth of Field EAN 13 (13mil) | 0mm-180mm |
| Minimal Print Contrast | >15% |
| Scan Angle Roll | 360° |
| Scan Angle Pitch | ±55° |
| Scan Angle Skew | ±50° |
| Field of View Horizontal | 42.4° |
| Field of View Vertical | 36° |
| Scan Modes | Advanced sense mode |
| Motion Tolerance | 3.5m/s |
Data Capture| 1D | All major 1D symbologies, including EAN-13, EAN-8, UPC-A, UPC-E, Code 128, Code 39, Codabar, UCC/EAN 128, RSS, Interleaved 25, ITF 14, ITF 6, Standard 25, Matrix 25, COOP 25, Industrial 25, Plessey, MSI Plessey, Code 11, Code 93, Code 49, Code 16K. |
| 2D | All major 2D symbologies, including PDF417, QR Code, Data Matrix, Chinese Sensible Code, Micro PDF417, GM Code, Micro QR, Code One. |
Physical| Dimensions (mm) | Without base: 151 (W) x 141.5 (H) x 97.5 (D) mm; With base: 151 (W) x 156.5 (H) x 108.5 (D) mm |
| Weight | 542g (without base), 678g (with base) |
| Interfaces | RS-232, USB |
| Notifications | Beep, LED indicator |
| Input Voltage | 5 VDC±5% |
| Current @ 5VDC Operating | 500mA (typical) |
| Current @ 5VDC Standby | <100mA |
| Power Consumption | 2W (typical), 2.5W (max.) |
Environmental| Operating Temperature | -20°C to 50°C (14°F to 122°F) |
| Storage Temperature | -40℃ to 70℃ (-40°F to 158°F) |
| Humidity | 5% to 95% (non-condensing) |
| Electro Static Discharge (ESD) | ±15 kV (air discharge), ±8 kV (direct discharge) |
| IP Rating | IP52 |
Accessories| Standard | USB cable used to connect the FR80 to a host device; DC 5V power to power the FR80 |
Software| Configuration Tools | EasySet |